Microtek Grid tied inverters, or GTI, are not a special type of DC to AC power inverter that is widely used in renewable energy systems. They are often used to power the grid that can be sold to an electrical company. For example, if within a month the Microtek Grid tied inverters system feeds 500 kilowatt hours on the utility grid, and of these 100 hours spent, they will receive compensation for an additional 400 hours. Policies regarding this ‘complete rating’ program vary depending on your location and the authorities in it. There are many different types of grids tied to the market today but Microtek Grid binding inverters form new and advanced technologies. Microtek Grid variants with high-frequency Inverter use a computer process that contains several different steps to convert power into high frequency AC, return to DC, and then AC again to the required output power. BENEFITS OF GRID-TIED SOLAR INVERTER 1. Significant reduction in electricity bills Since there are net meters, the consumer should only pay for the remaining electricity he uses, to ensure that the monthly debt is significantly reduced. Many of our customers are able to reduce their monthly bills by 90%. 2. Easy maintenance The removal of batteries from the grid system makes maintenance much easier. It also eliminates battery storage costs 3. Sync with other energy sources These systems can also sync with a diesel generator on site. This is important in the event of a power grid not being available. (You should add a link here to link to another blog or technical article to learn more about this) 4. Better ROI The cost of the On-grid solar system is lower than other types of solar systems because there are no batteries. It also produces a much higher energy value compared to other types of solar systems. Minor maintenance and reduction of monthly energy bills ensures that the customer receives a ROI of 25 – 30%. This means that the customer earns Rs.25,000 for every 1,00,000 investors in the sun. With these advantages, the grid system is best suited for the customer with a stable grid capacity and low power cuts. Outside homes, even educational institutions, industrial, commercial units include an on-grid system as the system can adapt to diesel generators to provide uninterrupted power. INPUT (DC) MODEL GTI 5KW-M11 Max. Input Power 5500W Max. Input Voltage 600V Start-up l/PI Rated l/P Voltage 120V / 360V MPPT Voltage Range 90V-580V Full Load DC Voltage Range 250V-580V Max. Input Current per MPPT 11A/11A Max. DC l/P Short Ckt.Current 15A/15A No. of MPPT/String per MPPT 2/1 Input Terminal Type MC4 OUTPUT (AC) Rated Power / Max. AC Power 5000W/5000VA Rated O/P | Max O/P Current 21.7A / 22.8A Nominal Grid Voltage UN/PE,220VAC,230VAC,240VAC Grid Voltage Range 180VAC-276VAC (According to Local Standards) Nominal Frequency (Hz) 50Hz/60Hz Grid Frequency Range (Hz) 45-55 / 54-66Hz THDi / Power Factor <3% / 1 (Adjustable 0.8) Power Limit Export Zero Export or Adjustable Power Limit Export (Optional) EFFICIENCY Max. Efficiency (DC/AC) 98.00% European Weighted Efficiency 97.50% SAFETY PROTECTION All above Models: Anti-islanding Protection, DC Reverse Polarity Protection, Over Temperature Protection, Over Voltage Protection, Over Current Protection, Leakage Current Degree of Protection/Topology IP65 | Transformer-less Self Consumption at Night < 1W COMMUNICATION Standard Communication Mode M11Models: USB, RS485, WIFl/GPRS/ETHERNET/SD CARD(Optional AMBIENCE PARAMETERS Operating Temperature -25°C - 60°C Acoustic Noise <25dB @1m Allowable Rel. Humidity Range 0 to Max 100% non-condensing Max. Operating Altitude 4000m Dimensions(LxWxH) in MM 405x315x135 Weight 11.5Kgs. STANDARD EMC EN 61000-6-1, EN 61000-6-2 , EN61000-6-3,EN61000-6-4 IEC 62116,IEC61727,IEC60068(1.2.14.30),IEC62109-1/2 Grid Standards 1KW to 3.3KW Models: AS4777 ,VDE V0124-100,VDE V0126-1-1VDE-AR-N4105, EN5043B,G83/2,C10/11,RD1699 SKW Model: AS4777,VDE0126-1- 1,VDE-AR-N4105, EN50438,G83/2,C10/11,RD1699












